Glass clamp for mounting on pipes of 38.1 - 42.4 mm ø / 6 and 8 mm

The glass clamp is 50 mm long. It has a round back that allows it to be attached to tubes with a diameter of 38.1 - 42.4 mm. Insert the supplied rubbers in the designated places in the mounting slot. This will protect the glass from damage. This type of glass clamp does not require drilling holes in the glass.

You have the choice between a glass mounting thickness of 6 or 8 mm as well as different surface optics such as untreated, stainless steel effect, Protectan brass effect or stainless steel.

When mounting, please make sure that first the bottom part is fixed to the tube with a screw. Then you can insert the plate and fix it with the top part and screw it tight. For the fastening you need an Allen key, as well as dowel and screw. These are not included in the scope of delivery.

For current occasion glass clamps are used much for the attachment of sneeze, spit shields or partitions.